View the confirmation screen, Return to the normal screen, Important – JVC SR-VS30E User Manual
Page 73

Masterpage:Right-NoTitle0
73
Filename [SR-VS30EK_4-EN.fm]
Page 73
February 1, 2002 2:16 pm
D
View the Confirmation screen.
After “SCAN COMPLETED” is 
displayed on the TV screen for 
about 5 seconds, the 
Confirmation screen looking 
like the one to the right 
appears. The stations your 
recorder located appear on a 
Confirmation screen — 
channel positions (PR), 
channels (CH) and station names (ID – 
੬
pg. 78). The
blueback screen and the programme currently being 
broadcast by the blinking station appear alternately for 8 
seconds each. To view the next page, use the 
rt
w
e
button on the remote control.
● The Guide Program numbers will also be set automatically
during Auto Channel Set.
E
Return to the normal screen.
Press MENU.
● Using the Confirmation screen, you can skip or add channel
positions, enter station names and perform other operations. 
Refer to pages 74 – 77 for the procedures.
● Depending on reception conditions, the stations may not be
stored in order, and the station names may not be stored 
correctly.
NOTES:
● Fine tuning is performed automatically during Auto Channel
Set. If you want to perform tuning manually, refer to page 77.
● If you perform Auto Channel Set when the aerial cable is not
connected properly, “SCAN COMPLETED –NO SIGNAL–” 
appears on the TV screen in step 4. When this happens, make 
sure of the aerial connection and press OK; Auto Channel Set 
will take place again.
IMPORTANT
● In certain reception conditions, station names may not be
stored correctly, and Auto Guide Program Number Set may 
not work properly. If the Guide Program numbers are not 
set properly when you timer-record a TV programme using 
the VIDEO Plus+ system, the recorder will record a TV 
programme of a different station. When programming the 
timer using the VIDEO Plus+ system, be sure to check the 
desired channel is selected correctly (
੬
pg. 36, “VIDEO
Plus+
®
Timer Programming”).
● Your video recorder memorizes all detected stations even if
reception of some of them is poor. You can delete those 
stations with an unacceptable picture (
੬
pg. 75, “Delete
A Channel”).
SR-VS30EK_1.book Page 73 Friday, February 1, 2002 2:33 PM
