Edit to or from another video recorder – JVC SR-VS30E User Manual
Page 50
Filename [SR-VS30EK_3-EN.fm]
Masterpage:Left
50
Page 50
February 1, 2002 2:04 pm
EDITING (cont.)
Edit To Or From
Another Video
Recorder
You can use your recorder as the source player or as the
recording deck.
A
Make connections.
Connect the player’s 21-pin SCART connector to the
recorder’s 21-pin SCART connector as illustrated on
page 51.
A When using your recorder as the source player ...
... connect its AV1 (L-1) IN/OUT connector to the
recording deck.
B When using your recorder as the recording deck ...
... connect its AV2 (L-2) IN/DECODER connector to
the source player.
C If another recorder is compatible with the Y/C
signal ...
... connect your recorder’s AV1 (L-1) IN/OUT
connector to another recorder.
With
C connection ...
● When using your recorder as the recording deck (C-a), set
“L-1 INPUT” to “S-VIDEO” and “L-2 SELECT” to “A/V”
(
੬
pg. 52, 53).
● When using your recorder as the source player (C-b), set “L-1
OUTPUT” to “S-VIDEO” (
੬
pg. 52).
B
Set the input mode of recording deck.
With this video recorder, press AUX (number key “0”)
and/or PR to select “L-1” for the AV1 (L-1) IN/OUT
connector, or “L-2” for the AV2 (L-2) IN/DECODER
connector, depending on the connector being used.
● When using another recorder as the recording deck, refer to its
instruction manual.
● When using the AV2 (L-2) IN/DECODER connector, set “L-2
SELECT” to “A/V” (
੬
pg. 53).
C
Select the recording deck.
Press VHS or DV.
D
Set the edit mode. (VHS deck only)
See “PICTURE CONTROL” on page 68.
E
Start the source player.
Engage the Play mode of the source player.
F
Start the recording deck.
Engage the Record mode of the recording deck.
Advantages of S-VHS video recorders
You can edit from VHS to S-VHS, S-VHS to VHS, or from
S-VHS to S-VHS.
● From VHS to S-VHS: Record VHS playback signals in the
S-VHS mode. Although the picture quality is inherently
limited by that of the original, the edited tape has better
picture quality than those made by VHS-to-VHS editing.
● From S-VHS to VHS: Because the picture quality of the
source material is very high, the edited tape has better
picture quality than those made by VHS-to-VHS editing.
● From S-VHS to S-VHS: All signals will be transferred with
minimum degradation.
1
2
3
4
5
6
7
8
9
1
2
1
2
3
0
3
4
4
SR-VS30EK_1.book Page 50 Friday, February 1, 2002 2:31 PM