On-screen display (for vhs deck), On-screen display (for dv deck) – JVC SR-VS30E User Manual
Page 7
Masterpage:Right-index
7
Filename [SR-VS30EK_1-EN.fm]
Page 7
February 19, 2002 3:52 pm
ON-SCREEN DISPLAY (for VHS deck)
When “O.S.D.” is set to “ON” (
੬
pg. 67), various
operational indicators appear on the TV screen.
A Operation Mode Indicators
B Tape Speed SP/LP/EP
* EP is for NTSC playback only.
C NTSC
]
PAL Indicator
D Tape Direction
E Counter Display
F Tape Remaining Time Indicator
੬ pg. 27
G Audio Mode Display
੬ pg. 25
H Tape Position Indicator
The tape position indicator
appears on the TV screen
when you press
3
or
5
from the Stop mode
or perform an Index Search
(
੬
pg. 23). The position of
“
q
” in relation to “0”
(beginning) or “+” (end)
shows you where you are
on the tape.
NOTE:
Depending on the type of tape being used, the tape position
indicator may not appear correctly.
I Type of Broadcast
੬ pg. 28
J VHS Indicator
K Current Day/Month/Year
L Clock Display
M Channel Position Number and Station Name/
Auxiliary Input Indicator (L-1, L-2, F-1 or SAT*)
* When “L-2 SELECT” is set to “SAT” (
੬
pg. 53), “SAT” appears
instead of “L-2”.
Dubbing Direction Indicators
(DV
]
VHS)
੬ pg. 44, 45
N Timer Warning Display
A warning appears on the TV screen to tell you that the timer-
recording is to start in 5 minutes if you’re not in the Timer
mode at that time. The warning blinks for the entire 5
minutes leading up to the start of timer recording. To clear
the display, press
&
on the remote control.
O “Cassette Loaded” Mark
Beginning
End
ON-SCREEN DISPLAY (for DV deck)
When “O.S.D.” is set to “ON” (
੬
pg. 67), various
operational indicators appear on the TV screen.
A Operation Mode Indicators
B Tape Speed SP/LP
C Sound Mode Display
੬ pg. 71
D Time Code Display
੬ pg. 35, 71
E Audio Mode Display
੬ pg. 33
F Type of Broadcast
੬ pg. 35
G DV Indicator
H Current Day/Month/Year
I Clock Display
J Channel Position Number and Station Name/
Auxiliary Input Indicator (L-1, L-2, F-1 or SAT*)
* When “L-2 SELECT” is set to “SAT” (
੬
pg. 53), “SAT” appears
instead of “L-2”.
Dubbing Direction Indicators
(VHS
]
DV)
੬ pg. 44, 45
K Timer Warning Display
A warning appears on the TV screen to tell you that the timer-
recording is to start in 5 minutes if you’re not in the Timer
mode at that time. The warning blinks for the entire 5
minutes leading up to the start of timer recording. To clear
the display, press
&
on the remote control.
ERROR Indicator*
* ERROR indicator appears when you start dubbing a tape with a
copy protection signals or when Audio Dubbing or Insert Editing is
not possible depending on the condition.
L “Cassette Loaded” Mark
SR-VS30EK_1-EN.fm Page 7 Tuesday, February 19, 2002 3:52 PM