Repeat playback, Playback/recording on vhs deck (cont.), Start playback – JVC SR-VS30E User Manual
Page 24: Activate repeat playback, Stop repeat playback
Filename [SR-VS30EK_1a-EN.fm]
Masterpage:Left
24
Page 24
February 1, 2002 1:49 pm
PLAYBACK/RECORDING ON VHS DECK (cont.)
Next Function Memory
The Next Function Memory “tells” the recorder what to do after
rewinding. Before continuing, make sure the recorder is in the
Stop mode.
a- For Automatic Start Of Playback
Press
3
, then press
4
within 2 seconds.
b- For Automatic Power Off
Press
3
, then press
1
within 2 seconds.
c- For Automatic Cassette Ejection After Tape Rewind
Press
3
, then press within 2 seconds.
NOTE:
The Automatic Power Off does not work if “AUTO TIMER” is set
to “ON” and if any timer programming has been made. If
“AUTO TIMER” is set to “ON”, the recorder directly goes into
the Timer-Standby mode at the same time when the
1
is
pressed for the Automatic Power Off.
Repeat Playback
Your recorder can automatically play back the whole tape 100
times repeatedly.
1
Start playback.
Press
4
.
2
Activate Repeat Playback.
Press
4
and hold for over 5 seconds, then release.
● The Play indicator (
u
) on the front display panel blinks
slowly.
● After playing back a tape 100 times, the recorder stops
automatically.
3
Stop Repeat Playback.
Press
8
at any time.
● Pressing
4
,
3
,
5
or
9
also stops Repeat Playback.
1
2
3
4
5
6
7
8
9
1
2
1
2
3
0
3
4
4
SR-VS30EK_1.book Page 24 Friday, February 1, 2002 1:50 PM