JVC SR-VS30E - Manual (Page 42)

Filename [SR-VS30EK_2-EN.fm]
Masterpage:Left
42
Page 42 January 25, 2002 6:29 pm
TIMER RECORDING (cont.)
Check, cancel and change programmes
A
Disengage the timer mode.
Press # (TIMER), then press 1 .
B
Access the Programme Check screen/display.
C
Access the Programme screen/display.
The front display panel shows the programme start time. Pressing
OK changes the display to the programme stop time, then the
date and the channel position.
To cancel or change a programme...
D
Cancel or change a programme.
Press & to cancel a programme. To change programme
settings, press the appropriate button: START+/–,
STOP+/–, DATE+/–, PR+/–, VPS/PDC and/or SP/LP
(
p ).
● You can change “TV PROG” to “SAT” for the channel position
by pressing the number key “0”.
E
Return to the normal screen/display.
Press " as many times as necessary. If there are still
some programmes remaining, go to step 6.
F
Return to the timer mode.
Press # (TIMER).
NOTE:
You can also check the programmes on the front display panel
even if the recorder’s power is off (unless the recorder is in the
Power Save mode
੬
pg. 67) or the recorder is in the Timer
mode; however, it is not possible to cancel or change the
programmes.
Press " .
● The Programme Check screen
or display appears for the deck
(VHS or DV) being selected.
1 2 3
4 5 6
7 8 9
1
2
1
2
3
0
3
4
4
Press " again to check
more information. Each time
you press
" , the next
programme’s information
appears.
SR-VS30EK_1.book Page 42 Friday, February 1, 2002 1:50 PM