JVC SR-VS30E - Manual (Page 19)

Masterpage:Right-NoTitle0
19
Filename [SR-VS30EK_1a-EN.fm]
Page 19 February 1, 2002 1:49 pm
F
Select the satellite receiver’s channel for
testing.
G
Check the result of the test.
If the satellite receiver’s
channel number has been
changed to the same one as
you set in step 6 ...
Press
rt to move the highlight
bar (pointer) to “CHANGED
TO ...”, then press OK or
e to
finish the Sat Control Set mode.
If the satellite receiver’s
channel number has not been changed correctly ...
Press
rt to move the highlight bar (pointer) to “NOT
CHANGED”, then press OK or e . Then perform the
procedure again from step 5.
NOTES:
● The Satellite Controller may not work with all types of satellite
receiver.
● For some satellite receivers, you need to set its channel input
mode to 2-digit.
● If your satellite receiver has more than two channel modes, be
sure to set to “All Channel Mode”. For details, refer to the
instruction manual of the satellite receiver.
● When selecting the satellite receiver’s channel ( ੬
step 6),
signals from the remote control may interfere with signals
transmitted from the Satellite Controller. In this case, move the
remote control as close to the recorder’s infrared beam
receiving window as possible.
Press the appropriate number
keys to enter one of the
channel positions on the
satellite receiver, then press
OK.
● You can select the channel
position between 1 to 999.
● After pressing OK, the recorder
enters the Test mode.
BRAND NAME CODE
JVC
AMSTRAD
CANAL SATELLITE
CANAL +
D-BOX
ECHOSTAR
ECHOSTAR (VIA DIGITAL)
FINLUX
FORCE
GALAXIS
GRUNDIG
HIRSCHMANN
ITT NOKIA
JERROLD
KATHREIN
LUXOR
MASCOM
MASPRO
NOKIA
PACE
PANASONIC
PHILIPS
RFT
SABA
SAGEM
SALORA
SIEMENS
SKYMASTER
THOMSON
TPS
TRIAX
WISI 73
60, 61, 62, 63, 92
81
81
85
78, 79, 80
82
68
89
88
64, 65
64, 78, 99
68
75
70, 71, 96
68
93
70
87, 94
65, 67, 74, 86, 92
74, 92
66, 84
69
97
83, 90
68
64
69, 98
97
83
91
64
SR-VS30EK_1.book Page 19 Friday, February 1, 2002 1:50 PM