JVC SR-VS30E - Manual (Page 71)

Masterpage:Right-Full-NoTitle0
71
Filename [SR-VS30EK_4-EN.fm]
Page 71 February 1, 2002 2:16 pm
DV MODE SET
* The default setting is bold in the table below.
8 SOUND MODE
12BIT
16BIT
Select the appropriate mode before recording on a Mini DV tape.
12BIT : Enables Audio Dubbing later.
16BIT : Audio Dubbing is impossible but the recorded sound quality is
higher than “12BIT”.
8 12BIT MODE
SOUND1
SOUND2
FULL SOUND
Select the appropriate mode when playing back an audio-dubbed Mini DV tape.
SOUND1 : Original recorded sound
SOUND2 : Audio-dubbed sound
FULL SOUND :Original recorded sound and Audio-dubbed sound
NOTES:
● When “12BIT MODE” is set to “FULL SOUND”, both the main and sub audio will be
audible for bilingual tapes.
● To select only the main audio or only the sub audio of bilingual tapes, set “12BIT MODE”
to “SOUND1”.
8 AUDIO REC
NICAM
MONO
Select the appropriate mode when recording the NICAM bilingual programmes.
NICAM : The NICAM audio programme will be recorded on the audio
track.
MONO : The Standard (monaural) audio programme will be recorded on
the audio track.
8 TIME CODE
ON
OFF
When this function is set to “ON”, the time code always appears on the TV screen
while the DV deck is being selected.
When this functions is set to “OFF”, the time code appears on the TV screen only
by pressing – –:– –. (
੬
pg. 7, 35)
SR-VS30EK_1.book Page 71 Friday, February 1, 2002 2:33 PM