Sony KDF-E42A10 - Manual (Page 68)

Using the Settings
68
KDF-E42A10/KDF-E50A10
2-597-544-12(1)
D:\WINNT\Profiles\noriko\Desktop\Troy EN2\2597544121\01US07MEN.fm masterpage:3 columns Right
Selecting PC Audio
Options To display the PC screen:
Press TV/VIDEO repeatedly on the
remote control until VIDEO 7 (PC)
appears.
The PC Input Audio setting includes the following options:
✍
You can change the settings for the PC input while the TV is
displaying the PC screen.
Option Description
Sound Mode Dynamic Select to enhance treble and bass.
Standard Suitable for spoken dialog.
Custom Flat setting.
Reset Select to restore the factory default settings.
Treble Adjust to increase or decrease higher-pitched sounds.
Bass Adjust to increase or decrease lower-pitched sounds.
Balance Adjust to emphasize left or right speaker balance.
Effect TruSurround
XT Select for surround sound (for stereo programs
only).
Simulated Adds a surround-like effect to mono programs.
Off Normal stereo or mono reception.
Speaker On Select to turn on the TV speakers.
Off Select to turn off the TV speakers and listen to
the TV’s sound only through your external
audio system speakers.
Audio Out This option can be set only when the Speaker option is set to
Off.
Easy control of
volume
adjustments Variable The TV's speakers are turned off, but the audio
output from your audio system can still be
controlled by the TV's remote control.
Fixed The TV’s speakers are turned off and the audio
output of the TV is fixed. Use your audio
receiver’s volume control to adjust the volume
(and other settings) through your audio system.
Video 7 PC
Audio
Press WEGA GATE to exit
Sound Mode Custom
Reset
Treble 0
Bass 0
Balance 0
Effect Off
Speaker On
Audio Out Variable