SUPER MICRO Computer H8QI6-F - Manual (Page 72)

4-20
H8QI6/i-F Serverboard User’s Manual
USB Mass Storage Reset Delay
Use this option to set the number of seconds POST waits for the USB mass
storage device after the Start Unit command. Options include 10, 20, 30 and
40 seconds.
Emulation Type
This sets the emulation type for USB mass storage devices. If Auto, USB
devices less than 530 MB will be emulated as Floppy and remaining as Hard
Disk drive. The Force FDD option can be used to force a HDD formatted drive
to boot as an FDD (example: ZIP drive). Options include Auto, Floppy, Forced
FDD, Hard Disk and CD-ROM.
4-5 Boot Settings Menu
BIOS Settings Confi guration
Quick Boot
If Enabled, this option will skip certain tests during POST to reduce the time
needed for the system to boot up. The options are Enabled and Disabled.
Quiet Boot
If Disabled, normal POST messages will be displayed on boot-up. If Enabled,
this display the OEM logo instead of POST messages.
Add On ROM Display Mode
This option sets the display mode for Option ROM. The options are Force BIOS
or Keep Current.
Bootup Num Lock
This option selects the power-on state for the NUM lock to either On or Off.
PS/2 Mouse Support
Use this option to select support for the PS/2 mouse. Options are Disabled,
Enabled or Auto.
Wait for F1 if Error
This setting controls the system response when an error is detected during the
boot sequence. When enabled, BIOS will stop the boot sequence when an error
is detected, at which point you will need to press the F1 button to re-enter the
BIOS setup menu. The options are Enabled and Disabled.