SUPER MICRO Computer H8QI6-F - Manual (Page 39)

Chapter 2: Installation
2-17
2-9 Onboard Indicators
LAN1/LAN2 LEDs
The Ethernet ports (located beside the VGA
port) have two LEDs. On each Gb LAN port,
one LED blinks to indicate activity while the
other may be green, amber or off to indicate
the speed of the connection. See the table
on the right for the functions associated with
the connection speed LED.
LAN LED
(Connection Speed Indicator)
LED Color Defi nition
Off 10 MHz
Green 100 MHz
Amber 1 GHz
Dedicated IPMI LAN LEDs
A dedicated IPMI LAN is also included on the
H8QI6/i-F serverboard (DP5001). The amber
LED on the right indicates activity, while the
green LED on the left indicates the speed
of the connection. See the table at right for
more information.
IPMI LAN Link LED (DP5001)
(Left) & Activity LED (Right)
Color Status Defi nition
Link
(Left) Green:
Solid 100 Mb/s
Activity
(Right) Amber:
Blinking Active
UID LED (LE1)
A rear UID LED Indicator, located at LE1,
works in conjunction with the rear UID switch
to provide easy identifi cation for a unit that
might be in need of service. Refer to Page
2-13 for further UID details.
Power LED
DP5004 is an Onboard Power LED. When
this LED is lit, it means power is present
on the serverboard. Be sure to turn off the
system and unplug the power cord(s) before
removing or installing components.
Power LED
(DP5004)
State System Status
On Standby power present
on motherboard
Off No power connected