SUPER MICRO Computer H8QI6-F - Manual (Page 70)

4-18
H8QI6/i-F Serverboard User’s Manual
Gateway Address
In the fi eld provided here enter the Gateway address in the decimal form of
xxx.xxx.xxx.xxx with xxx having a value of less than 256 and in decimal form
only. The current Gateway address in the BMC is shown.
MPS Confi guration
MPS Revision
This option allows you to set the MPS revision for your system. Options include
revision 1.1 and 1.4.
PCI Express Confi guration
Active State Power Management
This setting allows you to Enable/Disable PCI Express L0s and L1 link power
status.
Remote Access Confi guration
Remote Access
Use this option to Enable or Disable Remote Access in your system. If enabled,
the settings below will appear.
Serial Port Number
Use this setting to select the serial port for console redirection. Options include
COM1, COM2 or COM3*. The displayed base address and IRQ for the serial
port changes to refl ect the selection you make.
Note: Make sure the selected port is enabled.
Serial Port Mode
Selects the serial port settings to use. Options are (115200 8, n, 1), (57600 8,
n, 1), (38400 8, n, 1), (19200 8, n, 1) and (09600 8, n, 1).
Flow Control
Selects the fl ow control to be used for console redirection. Options are None,
Hardware and Software.