Siemens CL-010 - Manual (Page 91)

Chapter 5:Connection Mode
workstation by way of SNMP agent.
Backup Config
To backup your configuration for the router
to your computer, you can use Backup
Config web page to save the settings.
And when you want to restore the settings in
the future, simply open Backup Config web
page and use Browse button to locate the file
and click Restore.
Update Firmware
If you have to or want to update the
firmware for this router, you can open the
update software web page and choose the
correct file by pressing Browse. Then click
the Update Software button. The system
will execute the update procedure
automatically. When it is finished, the
system will tell you the update is
successfully.
Reset Router
To make effect the settings that you set for
this router, please open the Reset Router
web page and click the Reboot button to
invoke all settings.
You can restore your web pages default
settings. Simply check Reset to factory
default settings and click Reboot.