Siemens CL-010 - Manual (Page 83)

Chapter 5:Connection Mode
is the default setting.
IP type of Service:
The system provides some types of service
for you to choose. The meaning of each type
is the same as the denotation. The default
one is No change.
IPQoS
To classify the upstream traffic by assigning
the transmission priority of the data for
different users, please use IP QoS to
prioritize the data transmission.
The IP QoS allows you to set the settings
based on layer three IP packets.
To add a new QoS setting, please Add in the
page of Quality of Service, a page same as
the right side will appear.
Traffic Class Name:
Type in a name as the traffic class for
identification.
Protocol:
Choose the proper interface for this function.
If you don’t know how to select, simply use
the default one, TCP/UDP.
Source IP Address/ Subnet Mask:
You have to type in the source IP address
(ex: 192.168.1.50) and subnet mask
(ex:255.255.255.0) for the application (ex:
FTP, HTTP and so on) that you want to
invoke the QoS traffic rule.
Source Port:
Except the IP address, you also have to enter
the source port. Type in the source port for
the traffic rule. The range is from 0 to 65535.
Destination IP Address/Subnet Mask:
You have to type in the destination IP
address (ex: 192.168.1.254) and subnet mask
(ex:255.255.255.0) for the application that