beautypg.com

Siemens CL-010 User Manual

Page 17

background image

Chapter 3: Configuration

For Windows ME

1. Click on the Start menu, point to

Settings and click on Control Panel.

2. Double-click the Network icon.

3. The Network window appears. On the

Configuration tab, check out the list of
installed network components.
Option 1: If you have no TCP/IP
protocol, click Add.
Option 2: If you have TCP/IP protocol,
go to Step 6.

4. Highlight Protocol and click Add.

5. On the left side of the windows,

highlight Microsoft and then select
TCP/IP on the right side. Then click
OK.

6. While returning to Network window,

highlight TCP/IP protocol for your NIC
and click Properties.

7. On the IP Address tab, select Specify

an IP address. Enter the IP address:
192.168.1.x (x is between 2 and 254),
Subnet Mask: 255.255.255.0 and
Default gateway: 192.168.1.1. Then
click OK.

8. While returning to the Network

window, click OK.