beautypg.com

Appendix a bios error beep codes, A-1 ia-32 error beep codes, Beep code error message description – SUPER MICRO Computer 6113L-8 User Manual

Page 87

background image

Appendix A

BIOS Error Beep Codes

During the POST (Power-On Self-Test) routines, which are performed each

time the system is powered on, errors may occur.

Non-fatal errors are those which, in most cases, allow the system to

continue the boot-up process. The error messages normally appear on

the screen.

Fatal errors are those which will not allow the system to continue the

boot-up procedure. If a fatal error occurs, you should consult with your

system manufacturer for possible repairs.

These fatal errors are usually communicated through a series of audible

beeps. The numbers on the fatal error list, on the following page,

correspond to the number of beeps for the corresponding error. All

errors listed, with the exception of Beep Code 8, are fatal errors.

POST codes may be read on the debug LEDs located beside the LAN port

on the serverboard backplane. See the description of the Debug LEDs (LED1

and LED2) in Section 2-6.

Appendix A: BIOS Error Beep Codes

A-1

A-1

IA-32 Error Beep Codes

Beep Code Error Message

Description

1 beep

Refresh

Circuits have

been reset. (Ready to

power up.)

5 short, 1 long

Memory error

No memory detected in

system

8 beeps

Display memory read/write error

Video adapter missing or

with faulty memory

This manual is related to the following products: