SUPER MICRO Computer 6113L-8 - Manual (Page 35)

4-3
Chapter 4: System Safety
4-3 ESD Precautions
Electrostatic discharge (ESD) is generated by two objects with different
electrical charges coming into contact with each other. An electrical discharge
is created to neutralize this difference, which can damage electronic com-
ponents and printed circuit boards. The following measures are generally
sufficient to neutralize this difference before contact is made to protect your
equipment from ESD:
! Use a grounded wrist strap designed to prevent static discharge.
! Keep all components and printed circuit boards (PCBs) in their antistatic bags
until ready for use.
! Touch a grounded metal object before removing any board from its antistatic
bag.
! Do not let components or PCBs come into contact with your clothing, which
may retain a charge even if you are wearing a wrist strap.
! Handle a board by its edges only; do not touch its components, peripheral
chips, memory modules or contacts.
! When handling chips or modules, avoid touching their pins.
! Put the serverboard and peripherals back into their antistatic bags when not
in use.
! For grounding purposes, make sure your computer chassis provides excellent
conductivity between the power supply, the case, the mounting fasteners and
the serverboard.
!
! After accessing the inside of the system, close the system back up and secure
it to the rack unit with the retention screws after ensuring that all connections
have been made.