SUPER MICRO Computer 6113L-8 - Manual (Page 3)

Preface
About This Manual
This manual is written for professional system integrators and PC technicians.
It provides information for the installation and use of the SuperServer 6113L-8/
6113L-i. Installation and maintainance should be performed by experienced
technicians only.
The SuperServer 6113L-8/6113L-i is a high-end, dual Itanium2 processor
rackmount server based on the SC813HS-500/SC813Hi-500 1U rackmount server
chassis and the i2DML-8G2/i2DML-iG2 serverboard.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with the
server system and describes the main features of the SUPER i2DML-8G2/i2DML-
iG2 serverboard and the SC813HS-500/SC813Hi-500 chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 6113L-8/
6113L-i into a rack and check out the server configuration prior to powering up
the system. If your server was ordered without processor and memory compo-
nents, this chapter will refer you to the appropriate sections of the manual for
their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: System Safety
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
SuperServer 6113L-8/6113L-i.
iii
Preface