Sanyo VPC-HD1000 - Manual (Page 214)

199
English
TROUBLESHOOTING
Before taking your camera to the repair shop, check the following table for a
possible solution to the problem.
Camera
Problem Cause Action
Reference
page
Power
No power. The battery
pack is dead. Recharge the
battery pack, or
replace with a
new battery
pack. Or
connect the AC
adaptor
(supplied).
33, 37
The battery
pack has not
been inserted
correctly. Reinsert the
battery pack,
making sure to
orient it
correctly.
The camera
turns off by
itself. The power
save function
is operating. Turn on the
camera again.
41
Shooting
An image is
not captured
when the
[
] button or
[ ] button is
pressed.
The power is
not turned on. If the power
save function
was activated,
turn on the
camera before
shooting.
If the camera
was turned off,
press the ON/
OFF button to
turn it on.
41