Sanyo VPC-HD1000 - Manual (Page 126)

111
English
FOCUS MODE
You can choose from the following 2 types of autofocus (still image shooting
only):
9-point range finder focus:
The correct focus is determined from 9 different focus points within the
shooting area visible on the monitor. When the image is focused, a target
mark & appears.
Spot focus:
The camera focuses on the subject in the center of the monitor.
1
Display the NORMAL Mode
Shooting Menu (page 49), select
“FOCUS MODE”, and press the
SET button.
2
Select the desired icon, and
press the SET button.
h The focus mode is set.
h When the spot focus setting is
selected, the focus mark +
appears in the center of the
monitor.
B: 9-point range finder focus is
selected.
C: Spot focus is selected.
40 00:02:47
F3.5
1/40
Focus mark