Sanyo VPC-HD1000 - Manual (Page 136)

121
English
EXPOSURE CORRECTION
By assigning the exposure correction operation shortcut to the SET button
(page 150), you can make the image lighter or darker when capturing images.
1
Assign the operation
shortcut to the SET button
(page 150).
2
Toggle the SET button in
the direction for which the
operation shortcut was
assigned.
h The exposure correction
bar appears.
3
Toggle the SET button to
the left or right to adjust the
exposure.
h The exposure setting
numerical value is shown
at the left end of the
exposure bar.
h The exposure can be set
to a value from –1.8 EV to
+1.8 EV.
h The exposure correction
bar is canceled when the
MENU button or the SET
button is pressed.
HINT
The exposure correction setting is canceled in the following cases:
i When the pointer is set to the center position.
i When the camera is set to the playback mode.
i When the standby mode or sleep mode is activated.
i After the power is turned off.