Sanyo VPC-HD1000 - Manual (Page 162)

147
English
OPERATION SOUNDS
3
Toggle the SET button up or down to select the desired setting, and
press the SET button.
h The screen to select operation sounds appears.
h The respective screen to enable or disable the sound appears.
h Toggle the SET button up or down to select the desired setting,
and press the SET button.
ON:
Activates the sound.
OFF: Deactivates the sound.
h The screen to select the operation sounds appears.
h Select from 6 different sounds (A to F).
h You can toggle the SET button right to preview the selected
operation sound.
h If “OFF” is selected, no sound is produced.
h Toggle the SET button up or down to select the desired setting,
and press the SET button.
h The screen to select the volume for the operation sounds appears.
h You can select an operation sound volume from 1 (minimum) to
7 (maximum).
h Toggle the SET button up or down to select the volume, and press
the SET button.
4
Press the MENU button.
h The operation sound settings are completed.
HINT
i If you keep the MENU button pressed and turn on the power, the screen to
turn the operation sounds ON/OFF appears at once. You may find this a
convenient procedure to disable the operation sounds in places you do not
want them to be audible.