Sony HES-V1000 - Manual (Page 34)

34
Shows if the disc contains folders (BD-RE, BD-R only).
I Disc settings
◆Example: Display for a DVD-RW
A Disc Name
B Media
C Title Total
Original title total/Playlist title total*
* for DVD-RW (VR mode), DVD-R (VR mode) only
D Rec Date
Most recent and the oldest dates.
E Recordable Time
• Possible continuous recording time
Disc information may not be correct if the disc is recorded on other
devices.
F Format
Format: Indicates the recording format (VR or Video mode) for
DVD-RW and DVD-R.
G Disc settings
Selectable items vary depending on the disc type. See pages 35 for
details.
• Name Input
• Protect (write-protect)
• Finalize
• DVD Menu (DVD only)
• Format
H Remaining
• Bar indicator for disc capacity
• Disc’s remaining capacity/total capacity
Disc information may not be correct if the disc is recorded on other
devices.
Labeling a disc
Name or rename the disc using the Disc Information display.
a On the Disc Information display, select
[Name Input] and press ENTER.
The on-screen keyboard appears.
b After entering the disc name, select [Finish]
and press ENTER.
See page 90 for character input.
Note
You cannot label a disc if the disc is finalized.
Protecting a disc
Protect important discs against accidental erasure and alteration.
a On the Disc Information display, select
[Protect] and press ENTER.
The protection display appears.
b Select [On] and press ENTER.
Locking a BD-RE/BD-R
Set a password to control playback of recordable BDs.
a On the Disc Information display, select
[Lock] and press ENTER.
The lock display appears.
b Select [Yes] and press ENTER.
The password display appears.
c Enter a password using the number buttons,
select [OK], and press ENTER.
After you remove the disc, the disc will become
unplayable without the password.
To unlock, repeat the steps and select [Yes] in step 2.
Notes
• You will need the password for playback as well as for unlocking the
disc.
• Do not forget the password, as the password setting cannot be cleared
without the password.
• Do not forget the password. The password will be required when you
play the locked BD-RE/BD-R again on the server.
• When [Standby Mode] is set to [Standard], the disc may play without
the password if you turn off the power after unlocking the disc.
4.4/4.7GB
LP
XP
EP
SP
Disc Information
Disc Name
Media
Title Total
Rec Date
Remaining
DVD-RW Format Video
2
7/13/2007
Recordable
Time : 0H59M : 1H59M
: 4H01M : 5H56M
Name Input
Finalize
DVD Menu
Format
RETURN Finish
Close
Protect
Set protection for this disc.
Off On
Disc Lock Settings
Currently the disc is not locked.
Do you want to set a password and lock the disc?
No Yes
Set Password
The disc will be locked so the content cannot be
viewed. Set the password required to operate.
Operation will not be possible if you forget the
password.
- - - -
Cancel
OK