Sony HES-V1000 - Manual (Page 26)

26
Step 5: Connecting to the
Network
Connect the LAN terminal on the server to your Internet source using an Ethernet cable. See also “Network Settings” for necessary
network settings (page 121).
The supplied LAN cable has a ferrite clamp. Use the plug with the clamp when connecting to the LAN terminal on the server.
Note
Refer also to the instructions supplied with the router or the gaming adaptor.
When connecting to a router directly
When using a gaming adapter as a wireless bridge
PUSH/OPEN
CONTROL S IN/
IR IN HDMI OUT
COMPONENT VIDEO OUT AUDIO OUT R
R-AUDIO-L VIDEO LINE
IN 1
OUT
S VIDEO
Y PB PR
LAN(10/100)
OPTICAL COAXIAL
DIGITAL OUT PCM/DTS/
DOLBY DIGITAL
L
LAN(10/100) LAN
LAN
To LAN terminal
Wireless Router
Ferrite clamp
(Closest to the server) Modem
Server
Internet
PC
LAN cable (not supplied)
PUSH/OPEN
CONTROL S IN/
IR IN HDMI OUT
COMPONENT VIDEO OUT AUDIO OUT R
R-AUDIO-L VIDEO LINE
IN 1
OUT
S VIDEO
Y PB PR
LAN(10/100)
OPTICAL COAXIAL
DIGITAL OUT PCM/DTS/
DOLBY DIGITAL
L
LAN(10/100) LAN
To LAN terminal
Modem
Server
Internet
Wireless Router
PC
Ferrite clamp
(Closest to the server)
Gaming adaptor
LAN cable
(not supplied)