Instructions for the user – Smeg A2PY-6 User Manual

Page 36

Instructions for the User

10.5.2

Setting the cleaning cycle with electronic analogue clock

FUNCTION SELECTOR KNOB

Turn the function selector knob to the

symbol

and keep pressing on

the symbol

The display will be as shown in figure 1 with the figure 1

flashing and the segments up to 6 lit, showing the minimum duration of

the pyrolysis procedure (1 hour and a half). Press the

key within 1/2

seconds to increase the duration of this operation up to a maximum of
three hours. Figure 2 shows a cooking duration of 2 hours and 40
minutes.

6/7 seconds after the knob has been turned to the

symbol

or the

pyrolysis duration has been set, the oven will start the cycle. One of the
illuminated segments will go out each time a minute passes.

The start of the pyrolysis cycle can be programmed within the next 12
hours.

After setting the pyrolysis duration, press the

key and set the pyrolysis

start time by pressing the

keys.

The internal segments will remain on and the external ones will flash until
the current time is the same as the cycle start time.