Samsung CAPTIVATE SGH-I897 - Manual (Page 104)

99
WPS Button Connection
The WPS (Wi-Fi Protected Setup) button is a standard for easy
and secure wireless network set up and connections. To use
WPS, the connecting device must support WPS and be
compatible with Wi-Fi Protected Access (WPA) security. WPS can
automatically set up a random network name and WPA wireless
security for wireless Wi-Fi phones, routers, access points,
computers, adapters, and other electronic devices.
WPS allows you to push buttons instead of entering a network
name and wireless security PIN.
1. From the Home screen, touch ➔ Settings ➔ Wireless
and network ➔ Wi-Fi settings.
2. Touch WPS button connection.
3. Press the WPS button on your Wi-Fi access point within 2
minutes.
Bluetooth settings
In this menu you can activate Bluetooth, view or assign a device
name, activate your phone so other Bluetooth devices can
discover it, or scan for other, available Bluetooth devices with
which to pair.
Activating Bluetooth
ᮣ From the Home screen, touch ➔ Settings ➔ Wireless
and network ➔ Bluetooth settings and tap Bluetooth to turn
it on.
Note: Bluetooth must be enabled prior to use.
Device Name
1. Activate Bluetooth. For more information, refer to “Turning
Bluetooth On and Off” on page 130.
2. From the Home screen, touch ➔ Settings ➔ Wireless
and network ➔ Bluetooth settings and touch Device name.
The assigned device name displays.
3. Press to erase the current device name and enter a
new name for this device using the keyboard.
4. Press OK to confirm your setting.
Discoverable
ᮣ From the Home screen, touch ➔ Settings ➔ Wireless
and network ➔ Bluetooth settings and touch Visible.
The phone is now activated for discovery for 119 seconds
so you can pair with another device. After 119 seconds the