SMC Networks SMC2482W - Manual (Page 9)

1.1 | EZ Connect Turbo 11/22 Mbps Wireless Bridge
LED Indicators
The preceding diagram shows the LED indicator lights on the EZ
Connect Turbo Wireless Bridge. The EZ Connect Turbo Wireless
Bridge has 2 removable antennas, which are adjustable for best
wireless reception.
The front of the Wireless Bridge has 3 labeled indicator lights.
When you connect your Bridge to your network, these lights will
be on, off, or blinking, indicating the following states.
1.2 | Resetting the SMC2482W EZ Connect TM Turbo
11/22 Mbps Wireless Bridge
To correct temporary connectivity problems, the SMC2482W
Wireless Bridge can be reset by the following methods:
• The physical reset button on the back of the unit.
• You can reset the unit or reset the unit to factory defaults
using the Web-based Utility.
Using the Reset button on the back of the SMC2482W
1. Locate the [Reset] button on the back of the Wireless Bridge.
2. Unplug the power from the back of the Wireless Bridge for
5 seconds.
Light On Off Blinking
LAN Ethernet Connection No Ethernet Data being sent or
Connection received over
Ethernet connection
WLAN Wireless Connection No Wireless Data being sent or
Connection received over
wireless connection
Power Receiving Power Not Receiving N/A
Power
10