SMC Networks SMC2482W - Manual (Page 36)

37
Section 8 | Changing the Password
on the SMC2482W
For network security, it is a good idea to change the EZ
Connect
TM Turbo Wireless Bridge’s default password. To change
the password on your SMC2482W, follow the steps outlined
below:
1. Log into the SMC2482W using the Web-based Utility.
(See section 4.2 for more information)
2. Click on [Advanced Setup] link.
3. The default page is the [System] section. Click on
[Password Settings] option.
Note: From this section, you can also change the idle Time-Out
option. This is the amount of time that Web-based Utility
will stay logged in without activity.