SMC Networks SMC2482W User Manual

Page 20

Text mode
Original mode

Note: The SMC2482W is DHCP-enabled by default. If you do not

know the IP address that was assigned by your DHCP
server, please use the Windows Utility or look at your
DHCP client list to get the correct IP address to use. If you
do not have a DHCP server on your network, then the
SMC2482W will auto-assign itself an IP address of:
192.168.2.55.

3. Log into the Web-based Utility. The factory default password

for the SMC2482W is “default”, all lower-case.

4. Once logged into the Web-based Utility, you can:

• Configure wireless settings and TCP/IP settings
• Configure Operating Mode
• Configure wireless security (WEP)
• Configure MAC address filtering
• Change administrator password
• View connection status and Bridge information
• Reset/Restore Wireless Bridge
• Upgrade Firmware