SMC Networks SMC2482W - Manual (Page 8)

9
Section 1 | Getting Started
Site Location
Choose a location for your EZ Connect Turbo Wireless Bridge. In
Bridge mode, the best location for the SMC2482W is at the edge
of your wireless coverage area. In Access Point mode, the best
location is at the center of your wireless network.
Connect the Ethernet cable
The EZ Connect Turbo Wireless Bridge should be connected to a
network switch or hub that is connected to a DHCP server, or
connected to a Barricade Broadband Router. Use a standard
Category 5 UTP Ethernet cable with an RJ-45 connector to con-
nect the Bridge to one of router, hub, or switch.
Connect the power cable
Connect the power adapter cable to the 5V DC power socket on
the rear panel.
Warning: Use only the power adapter supplied with the
SMC2482W. Using another power adapter will cause
damage to the unit and void the warranty.
Antennas
LED Indicator lights:
• Power
• Wireless Transmit/Receiver
• Ethernet Link/Activity