SMC Networks SMC2482W User Manual

Page 10

3. Hold down the [Reset] button which is located on the back of

the device. You may need to use a pin or other pointed object
to hold the button down.

4. Plug the power connector into the Wireless Bridge while

holding down the [Reset] button.

5. The “TX/RX” LED will be solid, then flash 5-6 times.

6. Then the “LINK/ACT” LED will blink quickly several times.

7. Release the [Reset] button.

8. Unplug the power from the Wireless Bridge for 2 seconds, and

then plug the power back in.

9. The Wireless Bridge will reboot and the LEDs will return to the

normal status.

Using the Web-based Utility

1. Log into the SMC2482W Web-based Utility. (See section 4.2

for more information)

2. Click on [Tools] link on the left hand navigation menu, and

then click the [Reset] option.