SMC Networks SMC2482W - Manual (Page 15)

16
The SMC2482W is a Plug-and-Play device. When you plug this
Wireless Bridge into your network, it will automatically get an IP
address from your DHCP server and begin to provide wireless
connections based on your current network IP configuration.
3.1 | Verify Equipment and Permissions
At computer that you want to install the EZ Connect TM Turbo
Wireless Bridge Utility software, please have the following items
available:
• The EZ Connect TM Turbo Wireless Bridge CD-ROM
• These installation instructions
Before you proceed with the Utility setup, verify the following:
• You have administrator privileges on the computer that you
are working on. On computers running Windows 2000 or
Windows XP, you must be a member of the Administrator
group to install software and change network settings. If
you cannot run setup, click Log Off from the Start menu,
and then log on with an administrator’s account. If you
don’t have administrator access please contact your system
administrator.
• Disable any Anti-Virus or other software applications that
could hinder the installation process.
To install the Wireless Bridge Utility program, insert the
“SMC2482W Utility and Documentation” CD-ROM into your
CD-ROM drive. If the CD does not start automatically after a few
seconds, open My Computer, double-click the CD-ROM icon, and
then double-click Setup.exe. The Welcome splash screen should
appear.