SMC Networks SMC2482W - Manual (Page 11)

12
3. Click the [APPLY] button to complete the reset process.
4. The unit will reboot and reset the SMC2482W.
Using the Web-based Utility to reset the SMC2482W to
factory defaults
1. Log into the SMC2482W using the Web-based Utility.
(See section 4.2 for more information)
2. Click on [Tools] link on the left hand navigation menu, and
then click the [Configuration Tools] option.
3. Click the [Default] button to reset the unit to factory defaults.
4. The unit will reboot and reset the SMC2482W to factory default.
Note: If you set the SMC2482W to be DHCP-enabled and
changed the IP address or wireless settings on the
SMC2482W, you will need to use the Windows Utility to
re-configure the device so you can access the Web-based
Utility again.