SMC Networks SMC2482W - Manual (Page 32)

33
6.3 | Configure MAC Filtering using Web-based
Utility (Access Point mode)
1. Log into the SMC2482W Web-based Utility.
(See section 4.2 for more information)
2. Click on [Advanced Setup] link.
3. Click on [Filter] link on the left hand navigation menu.
4. Check the [Enable] option.
5. Enter in the MAC address of the clients/users that you want
to have access to your wireless network.
Note: On the MAC Filtering option, there is a Connection list
option. This drop-down menu will list all of the clients
connecting to the AP who received a DHCP IP address. If
you want to add one of these users to the MAC table,
simply select them in the drop-down menu and select the
ID that you want to copy them and click the [Copy to]
button.