SMC Networks SMC2482W - Manual (Page 27)

28
4. When you have completed configuring these settings, click
the [APPLY] button to save the settings and reboot the
Wireless Bridge.
5. To configure wireless settings, click on the [Wireless] link on
the left hand navigation menu, and then choose the
[Configuration] option.
From this section, you can configure:
• AP Name
• SSID
• Transmission Rate
• Basic Rate
• Channel
• Preamble
• Beacon Interval
• RTS Threshold
• Fragmentation Threshold
• DTIM Interval
• Authentication Type
• Antenna
• SSID Broadcast
Note: Definitions of these settings can be found in the Glossary
section at the end of this User Guide.
6. When you have completed configuring these settings, click
the [APPLY] button to save the settings and reboot the
Bridge.