Sharp SGH-I627 - Manual (Page 124)

120
Contacts
No number is dialed when
you recall a contact card • Check if a number was stored in
the contact card.
• Re-store the number, if necessary.
Bluetooth
I cannot end a Bluetooth
connection If another device is connected to your
device, you can end the connection by
deactivating Bluetooth. Go to Bluetooth
and select
Turn Off Bluetooth.
I cannot find my friend’s
Bluetooth enabled device • Be sure that both activated
Bluetooth.
• Be sure that the distance between
the two devices is not over 10
meters or that there are no walls or
other obstructions between the
devices.
• Be sure that the other device is in
the discoverable mode.
• Be sure that both devices are
compatible.
I cannot discover the remote
Bluetooth stereo headset • Be sure that the Bluetooth
functionality on the phone is turned
on.
• Be sure that the remote Bluetooth
stereo headset is in the
discoverable mode.
• Be sure that the remote Bluetooth
device has the capability to act as
a stereo headset.
I cannot connect to the
remote Bluetooth stereo
headset Ensure that the correct passkey was
entered on the phone during the
connection with the headset. Most
Bluetooth headsets have a fixed passkey
that would be mentioned in their user’s
guide. You would need to enter the
passkey when establishing a connection
with the headset.
i627.book Page 120 Wednesday, February 18, 2009 3:26 PM