Sharp SGH-I627 - Manual (Page 118)

114
Problem Description Solution
The bars next to
disappear
• If you just turned on your phone,
wait for about 2 minutes, until your
phone finds the network and
receives a signal from the network.
• If you are in a tunnel or in an
elevator, the phone may not be
able to receive the network signal
properly. Move to an open place.
• This may display when you move
between different service areas. It
is normal.
The display is not clear In direct sunlight, you may not be able to
see the display clearly. Moving to a place
with different lighting should solve this
problem.
White lines display on the
screen This may happen if you turn on the phone
after a long period of disuse, or after
removing the battery without turning off
the phone. This is not related to the
phone’s life or performance. The display
should correct itself shortly.
Joy Stick is not responding
accurately If your Joy Stick is not responding
accurately, it may be necessary to
calibrate the Joy Stick.
• From the Home screen, press the
Fn key and the P key at the same
time.
• Do not touch the Joy Stick.
• Wait until the Calibration is Done
confirmation is displayed on your
phone.
• Press the OK soft key to return to
the Home screen.
i627.book Page 114 Wednesday, February 18, 2009 3:26 PM