Southbend 14" METAL CUTTING BANDSAW SB1022 - Manual (Page 21)

For Machines Mfg. Since 8/09 Model SB1021/SB1022
-19-
O P E R A T I O N
Controls
Refer to Figures 6–8 and the following
descriptions to become familiar with the basic
controls of this machine.
A. Motor Light: Lights when the ON button is
pressed and there is power to the machine.
B. On Button: Turns the bandsaw motor ON.
C. Off Button: Turns the bandsaw motor OFF.
D. Clamping Pressure Dial: Sets the correct
amount of pressure for pressing the ends of
the blades against each other.
E. Welding Clamp: Holds a segment of the
bandsaw blade to be welded.
F. Lock Lever: Secures bandsaw blade for
welding operations when rotated up.
G. Grinder Switch: Turns grinding wheel ON
and OFF.
H. Shear Lever: Cuts the bandsaw blade.
I. Welding Button: Activates the process of
fusing the two blades together.
J. Annealing Button: Heats up the blade joint,
then allows it to cool in a gradual manner to
establish weld strength.
K. Welder's Lamp Switch: Illuminates
welding station when turned ON.
Figure 6. Front controls.
J
K
A
I
H
G
F
B
C
D
E
L. Variable Speed Handwheel: Adjusts blade
speed from 88 to 384 FPM.
Figure 7. Variable speed handwheel.
L
M. Blade Tensioning Handwheel: Increases or
decreases blade tension when rotated.
N. Guide Post Elevation Knob: Raises or
lowers the guide post and upper blade guide
assembly.
O. Guide Post Lock Knob: Secures the guide
post and upper blade guide assembly in
position.
Figure 8. Blade controls.
M
N
O