Southbend 14" METAL CUTTING BANDSAW SB1022 - Manual (Page 13)

PREPARATION
For Machines Mfg. Since 8/09 Model SB1021/SB1022
-11-
P R E P A R A T I O N
Preparation Overview
The purpose of the preparation section is to help
you prepare your machine for operation.
The typical preparation process is as follows:
1. Unpack the machine and inventory the
contents of the box/crate.
2. Clean the machine and its components.
3. Identify an acceptable location for the
machine and move it to that location.
4. Level the machine and either bolt it to the
floor or place it on mounts.
5. Assemble the loose components and make
any necessary adjustments or inspections to
ensure the machine is ready for operation.
6. Connect the machine to the power source.
7. Test run the machine to make sure it
functions properly and is ready for operation.
Things You'll Need
During the setup process, operation, and
maintenance of your machine, you'll need the
following items:
For Lifting
s !
s ,IFTING
For Power Connection
s !
For Assembly
s Cotton Rags
s Mineral Spirits
s 3AFETY
s Oil Can with any General Machine Oil
s Blade Tension Tool
s Grease Gun with any API GL 2 Grease
s Stiff Grease Brush
s Phillips Screwdriver #2
s &LOOR
s Hex Wrench 5mm
s Hex Wrench 6mm
s Combo Wrench 1 ⁄
2
" or Ratchet and 1 ⁄
2
"
Socket
Unpacking
This item was carefully packaged to prevent
damage during transport. If you discover any
damage, please immediately call Customer
Service at (360) 734-1540 for advice. You may
need to file a freight claim, so save the containers
and all packing materials for possible inspection
by the carrier or its agent.