Sun Microsystems 805-1797-10 User Manual

Page 54

Text mode
Original mode

Name =

SUNW,qfe

Parent =

/pci@1f,2000/pci@2

Unit-address =

3,1

1. Set the

ipg1

and

ipg2

parameters for the above four devices in the

/kernel/drv/qfe.conf

file.

name = ‘‘SUNW,qfe’’ parent = ‘‘/pci@1f,2000/pci@2’’ unit-address = ‘‘0,1’’ ipg1=20 ipg2=10;

name = ‘‘SUNW,qfe’’ parent = ‘‘/pci@1f,2000/pci@2’’ unit-address = ‘‘1,1’’ ipg1=20 ipg2=10;

name = ‘‘SUNW,qfe’’ parent = ‘‘/pci@1f,2000/pci@2’’ unit-address = ‘‘2,1’’ ipg1=20 ipg2=10;
name = ‘‘SUNW,qfe’’ parent = ‘‘/pci@1f,2000/pci@2’’ unit-address = ‘‘3,1’’ ipg1=20 ipg2=10;

2. Save the

qfe.conf

file.

3. Save and close all files and programs, and exit the windowing system.

4. Halt and reboot the system by typing the

init 6

command at the

superuser prompt.

Sun Quad FastEthernet PCI Adapter Installation and User’s Guide

♦

Revision A, August 1997