Sun Microsystems 805-1797-10 - Manual (Page 44)

Operational Mode Parameters
Table C–5 describes the operational mode parameters and their default values.
TABLE C–5 Operational Mode Parameters
Parameter Values Description
adv_autoneg_cap 0
1
Local transceiver capability advertised by the
hardware
= Forced mode
= Auto-negotiation (default)
adv_100fdx_cap 1
0
1
Local transceiver capability advertised by the
hardware; read/write parameter
= Not 100Mbit/sec full-duplex capable (default in the
Solaris 2.5 and 2.5.1 software environments)
= 100Mbit/sec full-duplex capable (default in the
Solaris 2.6 software environment)
adv_100hdx_cap 1
0
1
Local transceiver capability advertised by the
hardware; read/write parameter
= Not 100Mbit/sec half-duplex capable
= 100Mbit/sec half-duplex capable (default)
adv_10fdx_cap 1
0
1
Local transceiver capability advertised by the
hardware; read/write parameter
= Not 10Mbit/sec full-duplex capable (default)
= 10Mbit/sec full-duplex capable
adv_10hdx_cap
1
0
1
Local transceiver capability advertised by the
hardware; read/write parameter
= Not 10Mbit/sec half-duplex capable
= 10Mbit/sec half-duplex capable (default)
1. The priority (in descending order) for these parameters is: adv_100fdx_cap ,
adv_100hdx_cap , adv_10fdx_cap , and adv_10hdx_cap.
30 Sun Quad FastEthernet PCI Adapter Installation and User’s Guide
♦
Revision A, August 1997