Sun Microsystems 805-1797-10 - Manual (Page 34)

Power Requirements
TABLE A–2 Power Requirements
Specification Measurement
Maximum Power Dissipation 14 Watts
Maximum Power Consumption 2.8 Amps @ 5V
Voltage Tolerance 5V +/- 5%
Ripple Maximum 100 mV
Operational Current 5V, 2.0 Amps
Performance Specifications
TABLE A–3 Performance Specifications
Specification Performance
Maximum Ethernet Transfer Rate 10/100 Mbps per channel
Host Interface 256-pin PBGA PCI to PCI bridge with a 64-bit primary
and 32-bit secondary interface.
Operates transparently in either 64-bit or 32-bit slots
via a PCI specific Universal 64-bit Card Edge.
Supports both 3.3v and 5v signalling environments.
Fully compliant with PCI Local Bus Spec., Rev. 2.1.
Network Interface 100BASE-TX using Category 5 (data-grade) cable;
10BASE-T using Category 3 (voice-grade) cable or
better
Single UTP RJ-45 for both 10 and 100 Mbps per
channel
20 Sun Quad FastEthernet PCI Adapter Installation and User’s Guide
♦
Revision A, August 1997