Sun Microsystems 805-1797-10 - Manual (Page 46)

TABLE C–7 Read-Only Transceiver Capabilities (continued)
Parameter Values Description
10fdx_cap 0
1
Local transceiver capability of the hardware; initialized at startup
= Not 10Mbit/sec full-duplex capable
= 10Mbit/sec full-duplex capable
10hdx_cap 0
1
Local transceiver capability of the hardware; initialized at startup
= Not 10Mbit/sec half-duplex capable
= 10Mbit/sec half-duplex capable
Reporting the Link Partner Capabilities
Table C–8 describes the read-only link partner capabilities.
TABLE C–8 Read-Only Link Partner Capabilities
Parameter Values Description
lp_autoneg_cap
0
1
= No auto-negotiation
= Auto-negotiation
lp_100fdx_cap
0
1
= No100Mbit/sec full-duplex transmission
= 100Mbit/sec full-duplex
lp_100hdx_cap
0
1
= No 100Mbit/sec half-duplex transmission
= 100Mbit/sec half-duplex
lp_10fdx_cap
0
1
= No 10Mbit/sec full-duplex transmission
= 10Mbit/sec full-duplex
lp_10hdx_cap
0
1
= No 10Mbit/sec half-duplex transmission
= 10Mbit/sec half-duplex
If the link partner is not capable of auto-negotiation (when lp_autoneg_cap is 0)
the information described in Table C–8 is not relevant and the parameter value = 0.
32 Sun Quad FastEthernet PCI Adapter Installation and User’s Guide
♦
Revision A, August 1997