Sun Microsystems 805-1797-10 - Manual (Page 41)

TABLE C–1 qfe Driver Parameter, Status, and Descriptions (continued)
Parameter Status Description
100hdx_cap
Read only Local transceiver capability of the
hardware
10fdx_cap
Read only Local transceiver capability of the
hardware
10hdx_cap
Read only Local transceiver capability of the
hardware
lp_autoneg_cap
Read only Link partner auto negotiation
capability
lp_100fdx_cap
Read only Link partner capability
lp_100hdx_cap
Read only Link partner capability
lp_10fdx_cap
Read only Link partner capability
lp_10hdx_cap
Read only Link partner capability
instance
Read and write Device instance
lance_mode
Read and write Additional delay before
transmitting a packet
ipg0
Read and write Additional delay before
transmitting a packet
Defining the Current Status
The read-only parameters described in Table C–2 explain the operational mode of the
interface. These parameters define the current status.
Configuring the Quad FastEthernet Device Driver Parameters 27