Samsung CDI-E090-010 - Manual (Page 99)

93
Shooting - Selecting Par
ticular Ef
fects
Switching between the Built-in
Flash Adjustment Settings
The flash fires with automatic flash adjustments (except in the mode), but it is
possible to set it so that it fires without any adjustments.
1
Select [Flash Adjust] from the [ (Rec.)] menu.
See Selecting Menus and Settings (p. 36).
2 Select [Auto] or [Manual] and press the button.
Compensating the Flash Adjustment (+/- (Flash))
The flash adjustment can be changed when [Flash Adjust] is set to [Auto]. The
settings can be adjusted in 1/3-stop increments in the range of –2EV to +2EV. You
can enjoy flash photography with exposure adjustments with the combined use of
the camera’s exposure compensation function.
1 Press the / / button.
2
Select (+/- (Flash)) using
C or D on
the multicontroller.
3 Adjust the compensation using
B or A
on the multicontroller.
You can shoot the image right after selecting
settings by pressing the shutter button. This
screen will appear again, once the image is shot.
4 Press the / / button.
5 Shoot the image.
e.g. Flash Adjustment Settings