Samsung CDI-E090-010 - Manual (Page 139)

133
Printing, T
ransferring
Setting the Printing Area (Trimming)
You can specify which portion for an image gets printed.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Prior to Trimming
Please set the Print Style (Image Settings, Paper, Borders and Date) first before setting
the trimming settings (p. 131).
1
In Replaying mode, press and
choose [Trimming] using
C or D on the
multicontroller and press again.
The trimming frame will appear at the center of
the image. If a trimming setting has already been
selected for the image, the frame will appear
around the previously selected portion.
Print Area Frame
4
Press the button.
With borderless or multiple prints, the top, bottom
and sides of the image may be cropped slightly. If
you have not specified a trimming setting, a frame
will appear around the area of the image that will
be printed, allowing you to check the portion that
will be cropped.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• The date settings are overridden by the DPOF settings if you are using them to
print (p.135)
• When printing multiple prints, the borders and the date cannot be set. (Images are
printed without any date or borders)
• With the [Bordered] option, the border is printed in practically the same space as
the recorded image.