Sanyo VM4500 - Manual (Page 92)

Controlling Roaming Charges Using Call Guard
In addition to the roaming icon, Call Guard alerts you when roaming
charges apply. This feature makes it easy to manage your roaming
charges by reminding you when you make or receive roaming calls. It
also requires you to take an additional step before placing or answering
a roaming call. This additional step is not required when you make or
receive calls while on the Sprint Nationwide PCS Network.
To turn Call Guard on or off:
1. Press to access the main menu.
2. Select Settings and press .
3. Select Roaming and press .
4. Select Call Guard and press .
5. Select On or Off and press .
To place roaming calls with Call Guard on:
1. From standby mode, dial 1 + area code + the seven-digit
number. (You can also initiate a call from the Contacts directory,
Call History, or Messaging.)
2. Press or (or press and highlight Call or
Call:Speaker On) and press .
3. Press to proceed while the pop-up message is displayed.
– or –
Ⅵ Press any key to erase the pop-up message, press ,
highlight Roam Call, or Roam:Speaker On, and press .
To answer incoming roaming calls with Call Guard on:
Ⅵ Press , highlight Answer or Answer:Speaker, and press .
– or –
1. Press or .
2. Press to proceed while the pop-up message is displayed.
Remember, if the Call Guard feature is set to On, you need to take
extra steps to make and receive roaming calls, even if you have
selected the Analog setting (see the previous page).
Section 2: Understanding Your PCS Phone
2D: Controlling Your Roaming Experience 80