Sanyo VM4500 - Manual (Page 30)

Answering a Roam Call With Call Guard Enabled
To answer a call when you are roaming and Call Guard is enabled:
1. Press or . (The following message will appear:
“Roaming rate applies. Please press [1] to accept.”)
2. Press to answer the call.
Note: If your phone is off, in an active PCS Vision Connection, or on a PCS Ready
Link call, incoming calls go to voicemail.
Ending a Call
To disconnect a call when you are finished:
With the Flip Open:
Ⅵ Close the phone or press .
With the Flip Closed:
Ⅵ Press and hold .
Note: If the setting for Close Flip is not set to “end call,” closing the phone will not
end the call. (See “Setting the Open/Close Flip Option” on page 62.)
Tip: Time/Date is displayed when you press while the phone is in use.
Using the Speakerphone
The speakerphone feature lets you hear audio through the speaker
and talk without holding the phone. When the speakerphone is
activated, use the volume control keys on the side of the phone to
adjust the volume.
To turn the speakerphone on during a call:
Ⅵ Press .
– or –
Press , highlight Speaker On, and press .
To turn the speakerphone off during a call:
Ⅵ Press .
– or –
Press , highlight Speaker Off, and press .
Section 2: Understanding Your PCS Phone
2A: Your PCS Phone – The Basics 18