Sanyo VM4500 - Manual (Page 28)

Important: To maximize performance when using your PCS Phone, extend the
antenna before a call and do not touch the antenna during a call (see page 217).
To place a call with the Flip Closed:
1. Make sure your phone is on.
2. Press and hold the Side Call key ( ) on the right side of
the phone. (You will see a message on the Sub LCD.)
3. Follow the system prompts. (The call will be made in
speakerphone mode, unless you have a headset attached to
the phone.)
ⅷ Redial to redial the last number you called.
ⅷ Voice Dial to use the Voice Dial function (see “Using Voice-
Activated Dialing” on page 125).
4. When you’re finished, press and hold .
Note: To use a Voice Dial, you must have stored Voice Dial entries (see
“Programming Voice Dial Tags” on page 125).
Answering Calls
To answer a call with the Flip Open:
1. Make sure your phone is on. (If your phone is off, incoming calls
go to voicemail.)
2. Press or to answer an incoming call. (Depending on
your phone’s settings, you may also answer incoming calls by
pressing any digit.)
Correct Incorrect
Section 2: Understanding Your PCS Phone
2A: Your PCS Phone – The Basics 16