Sanyo VM4500 - Manual (Page 49)

Adding a New Contact to Your Personal List
You can store the total of 200 entries in the Personal List/Per. Groups.
To add a new PCS Ready Link contact:
1. Press R-Link (left softkey) or press to access the PCS Ready
Link List.
2. Press Go to (left softkey), highlight Personal List, and press .
3. Highlight and press .
– or –
Highlight an entry and press Options (right softkey). Then
highlight New Contact and press
.
ⅷ If the Personal List is full or if you are not authorized to edit
the Personal List, you will see a warning message on the
display.
4. Enter a name for the new contact and press . (This is the
name you will see when calling or receiving a call from the
contact.)
5. Highlight the R-Link Number field, enter the contact’s 10-digit
PCS Ready Link number (their PCS Phone number) and
press
.
6. Press Save (left softkey) to save the new contact to your
Personal List.
Tip: You are not allowed to use the following symbols during step 4: “:”, “@”, “;”,
“/”, “*”, “)”, and “(”.
Section 2: Understanding Your PCS Phone
2A: Your PCS Phone – The Basics 37