Sanyo VM4500 - Manual (Page 44)

Receiving a PCS Ready Link Call (1-to-1 Call)
1. Make sure your phone’s PCS Ready Link mode is enabled (see
“Setting PCS Ready Link Mode” on page 27).
2. When you receive a PCS Ready Link call from a contact, “R-Link
Call,” the contact’s name, and the PCS Ready Link number
appear on the display. (You do not need to take any action to
answer the call.)
3. If the person placing the call has kept the floor (held the Ready
Link button), you will see the contact name and PCS Ready Link
number along with “has floor.”, and you will hear the caller
speaking.
4. When the caller finishes speaking and releases the Ready Link
button, you will see “Floor is open.” on the display screen. Press
and hold
to take the floor and reply to the caller. (You will
see “You have floor.” and hear a tone confirming that you may
speak.)
5. When the conversation is finished, press .
Receiving a PCS Ready Link Call (Group Call)
1. When you receive a PCS Ready Link call from one of the group
members, “Group Call,” the group member’s name, and the
PCS Ready Link number appear on the display.
2. Continue with the PCS Ready Link call as described on the
previous page.
3. When the conversation is finished, press .
Section 2: Understanding Your PCS Phone
2A: Your PCS Phone – The Basics 32